Install MAC OSX in Windows

Hello Every 1
Here Ill show you the guide to Install Mac OSX Snow Leapord in Windows PC

Things you will require:
1. Oracel Virtual Box (Get it from HERE: http://www.filehippo.com/download_virtualbox)
2. Snow Leapord iso file(You can get it from any Torrent Site...I got it from here:http://thepiratebay.se/torrent/6876536)

So here we Go:
STEP 1: Download and Install Virtual Box on your PC(Download it from the link given above).

STEP 2: Open Virtual Box

STEP 3: Click on NEW as shown in this Image below:

STEP 4: Type the details as given in the Image Below:

STEP 5: The next window will let you choose your RAM amount for the OS X you are Installing(1024MB will be more than enough)

STEP 6: This is where you’ll make your hard disk. Follow the steps as given in the Image:

This is where you’ll make your hard disk. 20GB should be enough so what it comes down to is dynamic or static. Dynamic will expand on use and Static will be a fixed 20GB no matter how much data is actually in it. Dynamic is better for not taking up your hard drive but Static should give you better performance. I normally use Dynamic. Click next unless you want to change it from Dynamic or if you want to increase the disk size or file location.

STEP 7: After the previous step now we have retured to the home screen of Virtual Box.
NOW CLICK MAC OS X &amp;gt; THEN CLICK ON THE SETTINGS AS SHOWN IN THE IMAGE BELOW:

STEP 8: At this window click on System at the left and uncheck Enable EFI as shown in the Image Below

STEP 9: Now click on the Storage button on the left. From there click on Empty under the IDE CONTROLER
Next click the disk image which is circled in the image below:

STEP 10: Now select the Snow Leapord iso file(DOWNLOAD THE FILE FROM THE LINK GIVEN AT THE TOP)

We have completed the basic settings. In the Next Step now we will install the Snow Leapord.

STEP 11: Click on the Start button as shown in the Image Below:

STEP 12: You will see a screen something like this:

At this point click inside the window and hit F8
After that type –v and press enter

STEP 13: If you have done every this corrent till this point you will see this screen:

STEP 14: From this point the actual Installation starts:

Choose your language then click next.(If you are unable to move your mouse around then hit Right-Ctrl + I)

STEP 15: Press Continue at this screen:

STEP 16: Press Agree at this Screen:

STEP 17: At this Window click Uilities at the top and Click Disk Utility as shown in the image below:

STEP 18: At this screen highlight 20GB VBOX HARDDISK.
Then click erase at the right and Name it what you want in the name box and then click erase at the bottom right.

Confirm the Erace Command by clicking Erase in the pop up window as shown in the image below:

STEP 19: Now click on DISK UTILITY AT THE TOP AND CLICK QUIT as shown in the image below:

STEP 20: Now your back at the installer. Highlight the drive that is now showing up and click continue as shown in the image below:

STEP 21: The next window is important. Click customize at the bottom left.

STEP 22: For AMD Users check check:
Any Updates included at the top.
Drop down Kernels and choose Legacy kernel.
AMD option below System support.

For Intel Users check:
Any Updates included at the top.
Drop down bootloaders and check the newest chameleon.
Drop down Kernels and choose Legacy kernel.
Then click Next done and Install

STEP 23: Then click Next done and Install. To speed up the process you can click Skip when the disc check pops up.

STEP 24: NOW WAIT TILL MAC OS IS INSTALLED:

STEP 25: THIS IS AGAIN A VERY IMPORTANT STEP
As soon as it says installation finished and starts counting down to restarts click on Devices at the top and hit CD/DVD Devices and click Unmount CD/DVD Device. Then click Machine and Reset then click reset at the prompt. as shown in the image below:

Next you’ll see the Chameleon loader and then OSX will begin to boot.

STEP 26: After it boots you will see the setup screens for OSX!
Follow the Instructions and finish the setup of your Mac OS as shown in the image below: